|
|
| Location: Home > Products > WaterFine Metallic Rust/Corrosion Resistant and Heavy-duty Anticorrosive Paint |
|
| |
| Product name ：WaterFine Metallic Rust/Corrosion Resistant and Heavy-duty Anticorrosive Paint |
|
|
| > Product Applications |
> Product Specification1 |
> Product Specification2 |
> Product Specification3 |
> Product Specification4 |
> Product Specification5 |
|
Applicable to high standard rust and corrosion resistance to steel surfaces storage tanks, vehicles, vessels, containers, metal bridges, steel structural parts, etc. |
|
I Product overview
◆Category: This product is two-component air-dry paint with high-grade resin and hardener as film material;
◆Constitution: High-grade resin, pigment, packing material, addictives, water, etc.;
◆Characteristics:
※Water is the disperse medium of this product, no fire point at normal temperature, combustion and detonation is unlikely to occur.
※Fine adhesion, scrub resistance, and chemical resistance;
※No poisonous or toxic substances produced in the course of construction and film formation, and environmental friendly.
II Scope of application: Apply for heavy-duty anticorrosive fields (E.g. rust/corrosion resistance against structural parts in offshore installations such as containers, vessels, offshore platforms, and docks, petrochemical plant’s pipeline & storage tanks, as well as steel metallurgical, electrical, food, and textile industries.)
|
Item |
Indicator |
|
Color and appearance |
(Component A) thick liquid of different color/ (Component B) transparent or ivory liquid |
|
Viscosity (paint-4cup, 23±2°C) (Component A) |
≥60s |
|
Solid content (120°C /2 hour) |
≥45% (Component A+B) |
|
Adhesion (Circle method) |
≤ class 1 |
|
Impact strength |
≥50 cm.kg |
|
Pencil hardness |
≥H |
|
Flexibility |
≤1 mm |
|
Brine resistance (3%NaCl solution) |
No blistering or peeling, allow minor discoloration in 500h |
|
Salt spray resistance (neutral salt spray) |
No blistering or peeling, allow minor discoloration in 1000h |
|
Drying and solidification (23±2°C, relative humidity≤80%) |
Surface dry≤1h/actually dry≤24h/hard dry ≤7days |
IV Construction for reference
◆Surface treatment: wipe off the impurity, for example, floating dust, rust, oil stain, etc. to keep the surface clean and dry;
◆Form of construction work: spray coating with or without air, better to choose large bore spray guns;
◆Blending ratio: Component A : Component B = 4:1 (weight ratio, which changes with different color). Evenly stir Component A and Component B respectively before blending;
◆Dilution ratio: (Component A + Component B) : water = 1: 0.05~0.15. Keep it standing 5~10 minutes for activation and filter with a piece of 120 mesh filter cloth;
◆Applicable viscosity: spray coating, 20~25s (paint-4cup, 23±2°C);
◆ Recoat interval: ≥12h (23±2°C);
◆Life in tanks: 1~2h at 23±2°C, decreasing with the increase of temperature; (Note: It refers to the pot life after Component A and Component B are blended)
◆Type of drying: naturally dry at normal temperature (15°C ~40°C) or bake at a temperature of 80°C ~90°C for 20~25 min.
◆Theoretical spreading rate: 8~9 m2/kg (20 micron dry film), while the actual quantity depends on the substrate structure and application method.
VII Attentions
◆Difference in the level of processing metal substrate is referred to final effect and barrier property of the film coating;
◆Coating it as quickly as possible after substrate done with an overcoating interval between 12h and 7 days (at 25°C);
◆Perform construction at a temperature between 15°C and 40°C and higher than the dew point by 3°C; Do not work at relative humidity≥80%;
◆Do not work outdoors when it is wet. If started, please cover the wet paint film with a canopy;
◆Keep the product in a cool and ventilate place (5°C~45°C). The validity is 1 year. If failing to meet the time limit, the product still can be used if proved to be up to standard through inspection.
VI Storing and packing
◆Packing: 16kg/barrel for Component A and 4kg/barrel for Component B. Specific packing specification may change with the fact.
◆Shipping: transport as non-hazardous goods. |
|
LZD-HTH01 WaterFine Epoxy Iron Red Anticorrosive Primer (Two-component)
I Product overview
◆Category: This product is two-component air-dry colored paint with high-grade resin as film material;
◆Constitution: High-grade resin, pigment, packing material, addictives, water, etc.;
◆Characteristics:
※Water is the disperse medium of this product, no fire point at normal temperature, combustion and detonation is unlikely to occur.
※Match a majority of waterfine and oil primers with favorable compatibility and fine adhesion between layers;
※Fine adhesion, wear resistance, rust resistance and chemical resistance;
※No poisonous or toxic substances produced in the course of construction and film formation, environmental friendly and according with the instruction RoHs of European Union.
II Scope of application: apply for moderate anticorrosive fields (like steel structures, containers, etc.)
III Technical data (typical data)
|
Item |
Indicator |
|
Color and appearance |
(Component A) iron red thick liquid / (Component B) ivory liquid |
|
Fineness |
≤40μm |
|
Viscosity (paint-4cup, 23±2°C) (Component A) |
≥40s |
|
Solid content (120°C /2 hour) |
≥50% (Component A+B) |
|
Adhesion (Circle method) |
≤ class 1 |
|
Impact strength |
≥50 cm.kg |
|
Pencil hardness |
≥H |
|
Flexibility |
≤1 mm |
|
Brine resistance (3%NaCl liquid, thickness of dual films: 50~60 um) |
No blistering or peeling, allow minor discoloration in 300h |
|
Salt spray resistance (neutral salt spray, thickness of dual films: 50~60 um) |
No blistering or peeling, allow minor discoloration in 168h |
|
Drying and solidification (23±2°C, relative humidity≤80%) |
Surface dry≤1h/actually dry≤24h/hard dry ≤7days |
IV Construction for reference
◆Surface treatment: wipe off the impurity, for example, floating dust, rust, oil stain, etc. to keep the surface clean and dry;
◆Form of construction work: spray coating or brushing;
◆Blending ratio: Component A : Component B = 4:1 (weight ratio). Evenly stir Component A and Component B respectively before blending;
◆Dilution ratio: (Component A + Component B) : water = 1: 0.15~0.25. Keep it standing 5~10 minutes for activation and filter with a piece of 200 mesh filter cloth;
◆ Applicable viscosity: spray coating, 25~30s (paint-4cup, 23±2°C);
Brushing: 30~50s (paint-4cup, 23±2°C);
◆Recoat interval: min. 4h (23±2°C) / max. 48h (23±2°C);
◆Life in tanks: 1~2h at 23±2°C, decreasing with the increase of temperature; (Note: It refers to the pot life after Component A and Component B are blended)
◆Type of drying: naturally dry at normal temperature (15°C ~40°C) or bake at a temperature of 80°C ~90°C for 20~25 min.
◆Theoretical spreading rate: 6.5 m2/kg (20 micron dry film), while the actual quantity depends on the substrate structure and application method.
VII Attentions
◆Difference in the level of processing metal substrate is referred to final effect and barrier property of the film coating;
◆Coating it as quickly as possible after substrate done with an overcoating interval between 12h and 7 days (at 25°C);
◆Perform construction at a temperature between 15°C and 40°C and higher than the dew point by 3°C; Do not work at relative humidity≥80%;
◆Do not work outdoors when it is wet. If started, please cover the wet paint film with a canopy;
◆Keep the product in a cool and ventilate place (5°C~45°C). The validity is 1 year. If failing to meet the time limit, the product still can be used if proved to be up to standard through inspection.
VI Packing and shipping
◆Packing:16 kg/barrel for Component A, 4 kg/barrel for Component B
◆Shipping: transport as non-hazardous goods. |
LZD-HLSX WaterFine Epoxy Zinc Phosphate Anticorrosive Primer
Product overview
This product is two-component coat with fine resistance to rust, grease, water, brine, and solvent. The paint film is durable and compact, featuring good adhesion towards substrates. It is easy to apply with no environmental pollution and match epoxy/polyurethane/rubber/vinyl and other topcoats with favorable compatibility and adhesion between layers.
Scope of application
Apply for rust/corrosion resistant primer and non-zinc coat primer for steels, and rust/corrosion resistance against steel structural parts in offshore installations such as vessels, containers, offshore platforms, and docks, petrochemical plant’s pipelines & storage tanks, as well as metallurgical, electrical, food, and textile industries.
Typical technical data
|
Color and appearance |
Iron red, smooth coating film |
Natural dry, 25°C, 75%RH |
Surface dry, h |
1 |
|
Density, intensity, kg g/cm3 |
2.8-3.0 |
Actually dry, h |
24 |
|
Dry by baking at 80°C |
20min |
|
Recommended dry film thickness, um |
60-80 |
Impact strength, kg·cm |
50 |
|
Fineness, um |
40 |
Flexibility, mm |
1 |
|
Viscosity, s, 25 |
40-60 |
Volume solid content, % |
≥50 |
|
Theoretical amount, g/m2 |
150-180 (30um dry film) |
Resistant to 3% brine, 500h |
No blistering or rusting |
|
Adhesion, class |
1 |
Salt spray resistance, 168h, class |
2 |
Construction for reference and others
1. Clear the surface of items to be coated before painting by sand blasting and shot blasting in grade Sa25 and manual and power tools in grade St2 to remove rust;
2. Stir Component A completely and evenly before use. Prepare with a weight ratio of A:B = 7:1, blend uniformly 10 min for maturing, and filter with a 120 mesh strainer. Spray with or without air with an overcoating interval between 15h and 7d (at 25°C);
3. Life in tanks: 3h, decreasing with the increase of temperature;
4. Perform construction at a temperature between 15°C and 40°C and higher than the dew point by 3°C with a relative humidity lower than 80%;
5. Thinner: add 5%~10% drinking water or purified water according to the construction viscosity;
6. Packing: 21kg/barrel for Component A and 3kg/barrel for Component B;
7. Storage life: 6 months since the production. [ |
LZD-HFX01 WaterFine Epoxy Zinc Rich Anticorrosive Primer (Three-component)
I Product overview
◆Category: This product is three-component air-dry colored paint with high-grade resin as film material;
◆Constitution: High-grade resin, pigment, packing material, addictives, water, etc.;
◆Characteristics:
※Water is the disperse medium of this product, no fire point at normal temperature, combustion and detonation is unlikely to occur.
※Fine adhesion, wear resistance, rust resistance and chemical resistance;
※No poisonous or toxic substances produced in the course of construction and film formation, environmental friendly and according with the instruction RoHs of European Union.
II Scope of application: Apply for heavy-duty anticorrosive fields (E.g. rust/corrosion resistance against structural parts in offshore installations such as containers, vessels, offshore platforms, and docks, petrochemical plant’s pipeline & storage tanks, as well as steel metallurgical, electrical, food, and textile industries.)
III Technical data (typical data)
|
Item |
Indicator |
|
Color and appearance |
(Component A) light brown thick liquid /(Component B) gray powder /(Component C) transparent liquid |
|
Viscosity (paint-4cup, 23±2°C) (Component A) |
≥40s |
|
Solid content (120°C /2 hour) |
≥60% (Component A+B+C) |
|
Adhesion (Circle method) |
≤ class 1 |
|
Impact strength |
≥50 cm.kg |
|
Pencil hardness |
≥H |
|
Flexibility |
≤1 mm |
|
Brine resistance (3%NaCl solution) |
No blistering or peeling, allow minor discoloration in 1000h |
|
Salt spray resistance (neutral salt spray) |
No blistering or peeling, allow minor discoloration in 1000h |
|
Drying and solidification (23±2°C, relative humidity≤80%) |
Surface dry≤1h/actually dry≤24h/hard dry ≤7days |
(Note: test conditions for resistance to brine and salt spray: 1. Substrate: degreased and polished cold-rolled plate; 2. Coating: spray coating with epoxy zinc rich primer twice + epoxy micaceous iron intercoat twice; 3. Drying: air dry at normal temperature for 7 days.)
IV Construction for reference
◆Surface treatment: wipe off the impurity, for example, floating dust, rust, oil stain, etc. to keep the surface clean and dry;
◆Form of construction work: spray coating with or without air, better to choose large bore spray guns;
◆Blending ratio: Component A : Component B : Component C=4.5:4.5:1 (weight ratio). Evenly stir Component A and Component C respectively before blending;
◆Dilution ratio: (Component A + Component B + Component C) : water = 1: 0.05~0.25. Keep it standing 5~10 minutes for activation and filter with a piece of 120 mesh filter cloth;
◆Applicable viscosity: spray coating, 30~40s (paint-4cup, 23±2°C);
◆Recoat interval: min. 12 h (23±2°C) / max. 7 days (23±2°C);
◆Life in tanks: 1~2h at 23±2°C, decreasing with the increase of temperature; (Note: It refers to the pot life after Component A and Component B are blended)
◆Type of drying: naturally dry at normal temperature (15°C ~40°C) or bake at a temperature of 80°C ~90°C for 20~25 min.
◆Theoretical spreading rate: 4 m2/kg (30 micron dry film), while the actual quantity depends on the substrate structure and application method.
VII Attentions
◆Difference in the level of processing metal substrate is referred to final effect and barrier property of the film coating;
◆Coating it as quickly as possible after substrate done with an overcoating interval between 12h and 7 days (at 25°C);
◆Do not work outdoors when it is wet. If started, please cover the wet paint film with a canopy;
◆Perform construction at a temperature between 15°C and 40°C and higher than the dew point by 3°C; Do not work at relative humidity≥80%;
◆Keep the product in a cool and ventilate place (5°C~45°C). The validity is 1 year. If failing to meet the time limit, the product still can be used if proved to be up to standard through inspection.
VI Packing and shipping
◆Packing: 9 kg/barrel for Component A, 9 kg/barrel for Component B, 2 kg/barrel for Component C. Specific packing specification may change with the actuality.
◆Shipping: transport as non-hazardous goods. |
|
LZD-HYT01 WaterFine Epoxy Micaceous Iron Anticorrosive Paint (Two-component)
I Product overview
◆Category: This product is two-component air-dry colored paint with high-grade resin as film material;
◆Constitution: High-grade resin, pigment, packing material, addictives, water, etc.;
◆Characteristics:
※Water is the disperse medium of this product, no fire point at normal temperature, combustion and detonation is unlikely to occur.
※Fine adhesion, wear resistance, rust resistance and chemical resistance;
※No poisonous or toxic substances produced in the course of construction and film formation, environmental friendly and according with the instruction RoHs of European Union.
II Scope of application: apply for heavy-duty anticorrosive fields (as the intercoat for high performance anticorrosive paint like epoxy zinc rich primer to enhance the coating protection; or as the barrier coat for zinc sprayed or galvanized surface of metals like steels).
III Technical data (typical data)
|
Item |
Indicator |
|
Color and appearance |
(Component A) iron black thick liquid / (Component B) transparent liquid |
|
Viscosity (paint-4cup, 23±2°C) (Component A) |
≥80s |
|
Solid content (120°C /2 hour) |
≥60% (Component A+B) |
|
Adhesion (Circle method) |
≤ class 1 |
|
Impact strength |
≥50 cm.kg |
|
Pencil hardness |
≥H |
|
Flexibility |
≤1 mm |
|
Brine resistance (3%NaCl solution) |
No blistering or peeling, allow minor discoloration in 500h |
|
Salt spray resistance (neutral salt spray) |
No blistering or peeling, allow minor discoloration in 1000h |
|
Drying and solidification (23±2°C, relative humidity≤80%) |
Surface dry≤1h/actually dry≤24h/hard dry ≤7days |
(Note: test conditions for resistance to brine and salt spray: 1. Substrate: degreased and polished cold-rolled plate; 2. Coating: spray coating with epoxy zinc rich primer twice + epoxy micaceous iron intercoat twice; 3. Drying: air dry at normal temperature for 7 days.)
IV Construction for reference
◆Surface treatment: wipe off the impurity, for example, floating dust, rust, oil stain, etc. to keep the surface clean and dry;
◆Form of construction work: spray coating with or without air, better to choose large bore spray guns;
◆Blending ratio: Component A : Component B = 4:1 (weight ratio). Evenly stir Component A and Component B respectively before blending;
◆Dilution ratio: (Component A + Component B) : water = 1: 0.05~0.15. Keep it standing 5~10 minutes for activation and filter with a piece of 120 mesh filter cloth;
◆Applicable viscosity: spray coating, 30~40s (paint-4cup, 23±2°C);
◆ Recoat interval: ≥12h (23±2°C);
◆Life in tanks: 1~2h at 23±2°C, decreasing with the increase of temperature; (Note: It refers to the pot life after Component A and Component B are blended)
◆Type of drying: naturally dry at normal temperature (15°C ~40°C) or bake at a temperature of 80°C ~90°C for 20~25 min.
◆Theoretical spreading rate: 4 m2/kg (30 micron dry film), while the actual quantity depends on the substrate structure and application method.
VII Attentions
◆Difference in the level of processing metal substrate is referred to final effect and barrier property of the film coating;
◆Coating it as quickly as possible after substrate done with an overcoating interval between 12h and 7 days (at 25°C);
◆Perform construction at a temperature between 15°C and 40°C and higher than the dew point by 3°C; Do not work at relative humidity≥80%;
◆Do not work outdoors when it is wet. If started, please cover the wet paint film with a canopy;
◆Keep the product in a cool and ventilate place (5°C~45°C). The validity is 1 year. If failing to meet the time limit, the product still can be used if proved to be up to standard through inspection.
VI Packing and shipping
◆Packing: 16 kg/barrel for Component A,4 kg/barrel for Component B. Specific packing specification may change with the actuality.
◆Shipping: transport as non-hazardous goods. |
|
|
|
|
